This 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Precisely manufactured to industry standards, it is ideal for a wide range of fabrication and construction projects requiring a robust and long-lasting material solution.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.537" |
| Length | 16" |
| Width | 29" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet meets ASTM A240 specifications for seamless and welded austenitic stainless steel plate, sheet, and strip. The material exhibits excellent strength and formability, with a nominal composition of 18% chromium and 8% nickel, providing superior resistance to oxidation and general corrosion in diverse environments. Its 0.537-inch thickness, 16-inch length, and 29-inch width make it suitable for structural components, custom enclosures, food-grade processing equipment, and marine hardware where demanding performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any oils, debris, or protective coatings. 2. Precisely measure and mark cut lines according to fabrication drawings or design requirements. 3. Utilize appropriate cutting tools (e.g., abrasive saw, plasma cutter, waterjet) suitable for 0.537" thick stainless steel, ensuring adequate cooling to prevent thermal distortion. 4. Employ suitable fastening methods such as welding, bolting, or riveting, ensuring compatibility with 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper precautions, leading to contamination and potential rust. | Employ dedicated stainless steel cutting tools or ensure thorough cleaning of tools before and after use. Utilize appropriate lubrication and cooling during cutting. |
| Inadequate surface preparation before welding or finishing, resulting in poor adhesion or compromised corrosion resistance. | Thoroughly degrease and mechanically clean the weld area or surface to be finished. Passivate the stainless steel after fabrication to restore its protective oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication and metal art, Industrial equipment and machine guards, Food and beverage processing components, Marine hardware and structural elements, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||