This premium 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength. Precisely fabricated to specific dimensions, it's engineered for the rigorous demands of hydraulic systems and harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.498" |
| Length | 45" |
| Width | 36" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet boasts a nominal thickness of 0.498 inches, a length of 45 inches, and a width of 36 inches. The 304 grade provides excellent resistance to a wide range of corrosive media, making it ideal for hydraulic fluid containment, manifold blocks, and structural components exposed to moisture or chemicals. Its high tensile strength and ductility ensure reliability under pressure and resistance to deformation. This material meets stringent industry standards for performance and longevity in critical hydraulic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project requirements. 2. Prepare cutting surfaces with appropriate tooling for stainless steel. 3. Securely fasten the sheet to prevent movement during machining or fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools without proper lubrication. | Employ high-speed steel or carbide tooling with a flood coolant or cutting fluid specifically designed for stainless steel to prevent excessive heat buildup and tool wear. |
| Ignoring potential for work hardening during fabrication. | Use slower cutting speeds and deeper cuts to minimize work hardening, or consider annealing processes if extensive deformation is required. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold fabrication, Corrosion-resistant hydraulic fluid reservoirs, Structural components for marine hydraulics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||