This 304 stainless steel stock sheet is engineered for high-performance hydraulic systems. Offering exceptional corrosion resistance and durability, it provides a reliable foundation for critical components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.496" |
| Length | 35" |
| Width | 25" |
Built to exacting engineering tolerances, this 0.496-inch thick, 304 stainless steel sheet measures 35 inches in length and 25 inches in width. The 304 alloy provides superior resistance to oxidation and a wide range of corrosive media, making it ideal for hydraulic fluid containment, manifold blocks, and structural supports in demanding environments. Its robust nature ensures dimensional stability and long-term performance under pressure and exposure to harsh operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before fabrication. 2. Machine to precise dimensions according to system design specifications. 3. Deburr all edges thoroughly to prevent contamination and material stress risers.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for hydraulic components. | Always specify 304 stainless steel or higher for hydraulic applications to guarantee corrosion resistance and prevent premature failure. |
| Inadequate edge preparation after machining. | Thoroughly deburr all machined edges to eliminate potential stress concentration points and maintain fluid purity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Fluid Reservoirs & Containment, Structural Support for Hydraulic Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||