This 304 stainless steel sheet is engineered for demanding heating and cooling applications. Its superior corrosion resistance and thermal properties make it ideal for heat exchangers and high-temperature environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.482" |
| Length | 29" |
| Width | 20" |
A high-performance industrial component, this 0.482" thick sheet of 304 stainless steel measures 29" in length and 20" in width. Manufactured to meet stringent industrial standards, its austenitic structure provides excellent formability and weldability, alongside exceptional resistance to oxidation and pitting corrosion, crucial for prolonged exposure to aggressive media and elevated temperatures commonly found in HVAC systems. This material's inherent strength and durability ensure longevity and reliability in critical heat transfer and fluid containment applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate welding or fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive environments. | Always utilize 304 stainless steel for applications involving moisture, chemicals, or high temperatures to prevent premature corrosion and failure. |
| Inadequate edge preparation before welding. | Thoroughly clean and bevel edges to the recommended specifications for optimal weld integrity and to prevent stress concentrations. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Ductwork and Ventilation Systems, Industrial Oven Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||