This robust 304 stainless steel stock sheet is engineered for demanding industrial environments. Its substantial thickness and superior material properties make it ideal for critical pressure and temperature control systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.480" |
| Length | 42" |
| Width | 13" |
Purpose-built for heavy-duty applications, this 0.480-inch thick stock sheet, measuring 42 inches in length and 13 inches in width, is manufactured from premium 304 stainless steel. This austenitic alloy offers exceptional corrosion resistance, particularly against a wide range of atmospheric and chemical agents, and maintains its integrity across a broad temperature spectrum. Its high tensile strength and formability ensure reliable performance in high-pressure vessels, heat exchangers, industrial piping, and other critical components within pressure and temperature control systems, where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean, dry, and free of contaminants. 2. Carefully position the sheet to align with the intended application geometry. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) as dictated by the system design and operational pressures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure applications. | Always verify the material thickness and grade against the design specifications and expected operating pressures to prevent catastrophic failure. |
| Inadequate surface preparation before joining. | Thoroughly clean and degrease all surfaces to be joined to ensure optimal weld penetration and corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: High-pressure vessel fabrication, Heat exchanger construction, Industrial piping and manifold systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||