This 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength, ideal for custom hydraulic component fabrication. Its robust dimensions ensure suitability for a variety of demanding fluid power systems.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.470" |
| Length | 14" |
| Width | 31" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.470 inches in thickness, 14 inches in length, and 31 inches in width. Grade 304 stainless steel is chosen for its excellent corrosion resistance, particularly against a wide range of atmospheric and chemical environments commonly encountered in hydraulic systems. This material offers a favorable balance of strength and formability, making it suitable for fabricating custom manifolds, pressure vessels, structural components, and fittings where integrity and longevity are paramount. Its non-magnetic properties and resistance to pitting and crevice corrosion further enhance its suitability for critical hydraulic infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess component design requirements and confirm compatibility with 0.470" thick 304 stainless steel. 2. Precisely cut the stock sheet to the required dimensions using appropriate metalworking tools. 3. Perform any necessary machining, forming, or welding operations according to design specifications and industry best practices for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to material deformation or poor edge quality. | Employ carbide-tipped or high-speed steel cutting tools specifically designed for stainless steel, ensuring proper speed and feed rates. |
| Inadequate post-fabrication cleaning, leading to potential corrosion initiation sites. | Thoroughly clean all surfaces after fabrication using non-abrasive methods and appropriate cleaning agents to remove any residues or contaminants. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Hydraulic Manifold Fabrication, High-Pressure Fluid Containment, Corrosion-Resistant Hydraulic Fittings and Connectors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||