Engineered for superior thermal performance and longevity, this 0.445" thick 304 stainless steel stock sheet offers exceptional corrosion resistance, making it ideal for critical heating and cooling applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.445" |
| Length | 34" |
| Width | 20" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.445 inches in thickness, 34 inches in length, and 20 inches in width. The 304 grade provides excellent resistance to a wide range of corrosive media and atmospheric conditions, crucial for heat exchangers, ductwork, and high-temperature components. Its robust mechanical properties ensure structural integrity under thermal cycling and pressure variations, while the smooth surface finish facilitates efficient heat transfer and ease of cleaning. This material composition (minimum 18% chromium and 8% nickel) ensures weldability and formability for complex designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free from contaminants. 2. Carefully position the 0.445" thick 304 stainless steel sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques, ensuring structural integrity and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of stainless steel for corrosive environments. | Always verify the specific corrosive media and select 304 stainless steel for its broad resistance to acids, alkalis, and chlorides. |
| Improper welding practices leading to sensitization and reduced corrosion resistance. | Employ proper welding procedures, including post-weld heat treatment if necessary, to maintain the protective chromium oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Components, Industrial Oven Linings, HVAC Ductwork and Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||