This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it ideal for fabricating components in demanding hydraulic systems where reliability is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.417" |
| Length | 19" |
| Width | 48" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet meets stringent industry requirements for hydraulic fluid handling and pressure containment. Its 0.417-inch (approx. 10.6 mm) thickness provides robust structural integrity for fabrication into manifolds, reservoirs, and structural supports. The 19-inch by 48-inch dimensions offer ample material for custom machining and assembly. The inherent passivity and low magnetic permeability of 304 stainless steel ensure excellent performance in corrosive environments and prevent galvanic corrosion when in contact with other metals, crucial for long-term hydraulic system operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project requirements. 2. Prepare edges for cutting or machining according to design specifications. 3. Weld or fasten securely, ensuring proper joint integrity for pressure containment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel in corrosive hydraulic environments. | Always specify 304 stainless steel or higher for components exposed to hydraulic fluids and potential environmental corrosives. |
| Inadequate edge preparation for welding or fastening. | Thoroughly clean and bevel edges to ensure full penetration and structural soundness of welded or fastened joints. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Hydraulic Reservoir Construction, Pressure Vessel Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||