This robust 304 stainless steel stock sheet, measuring 0.399 inches thick, 42 inches in length, and 37 inches in width, is engineered for high-performance heating and cooling systems where extreme durability is paramount.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.399" |
| Length | 42" |
| Width | 37" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet offers exceptional dimensional stability and structural integrity. The 0.399-inch thickness provides significant rigidity, crucial for applications experiencing thermal expansion and contraction cycles. 304 stainless steel is selected for its excellent corrosion resistance to a wide range of media, high tensile strength, and its ability to withstand elevated temperatures, making it a premier choice for heat exchangers, flue liners, ductwork, and other critical components within demanding heating and cooling infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare mounting or joining surfaces, ensuring they are clean, dry, and free from contaminants. 3. Securely fasten or weld the sheet according to engineered design parameters, maintaining structural integrity and sealing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material than specified for high-pressure or high-temperature applications. | Always adhere to the required material thickness to prevent premature failure due to stress or thermal cycling. |
| Inadequate edge preparation before welding, leading to poor weld penetration and potential leaks. | Ensure proper beveling and cleaning of all edges to achieve strong, leak-proof welds. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Construction, Industrial Oven Components, High-Temperature Ducting and Ventilation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||