This 0.384" thick 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it ideal for robust hydraulic system components. Its precise dimensions ensure reliable performance and longevity in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.384" |
| Length | 28" |
| Width | 21" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is manufactured to exacting standards, featuring a thickness of 0.384 inches, a length of 28 inches, and a width of 21 inches. The 304 grade stainless steel provides excellent resistance to a wide range of corrosive media, including many acids and alkaline solutions commonly found in hydraulic fluid systems. This material's inherent strength and ductility allow for forming and machining into critical hydraulic components such as manifolds, accumulator housings, and specialized fittings where reliability and service life are paramount. Its non-magnetic properties also contribute to its suitability in sensitive hydraulic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Clean the surface of the sheet to remove any oil, grease, or debris before fabrication. 3. Utilize appropriate cutting, bending, and machining techniques for 0.384" thick 304 stainless steel, ensuring adherence to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify and use 304 or higher grade stainless steel for hydraulic components exposed to corrosive fluids or environments to prevent premature failure due to rust and corrosion. |
| Inadequate surface preparation before machining or welding. | Thoroughly degrease and clean the stainless steel surface to prevent contamination and ensure optimal weld quality and machining accuracy. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Accumulator Housings, High-Pressure Hydraulic Tubing Components, Specialized Hydraulic Valve Bodies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||