This 304 stainless steel stock sheet is engineered for robust hydraulic systems. Its superior corrosion resistance and dimensional stability ensure reliable performance in demanding environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.373" |
| Length | 24" |
| Width | 23" |
Precision-manufactured to tight tolerances, this 0.373" thick sheet, measuring 24" in length and 23" in width, is crafted from premium 304 stainless steel. This austenitic chromium-nickel alloy offers exceptional corrosion resistance, particularly against a wide range of chemicals and atmospheric conditions commonly found in hydraulic fluid environments. Its non-magnetic properties and excellent formability make it suitable for custom fabrication of hydraulic manifold blocks, reservoir components, and structural elements where fluid integrity and component longevity are paramount. The precise dimensions minimize machining waste and ensure seamless integration into complex hydraulic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project requirements. 2. Precisely cut or machine to final component specifications using appropriate tooling for stainless steel. 3. Deburr all edges thoroughly to prevent particulate contamination within hydraulic systems.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic environments. | Always specify 304 or 316 stainless steel for hydraulic components exposed to corrosive fluids or atmospheres to prevent premature failure due to oxidation and pitting. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and clean all cut edges to prevent the introduction of metallic particulates into the hydraulic fluid, which can damage seals and precision components. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Components, Custom Hydraulic System Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||