Engineered for robust performance in demanding heating and cooling systems, this 304 stainless steel sheet offers exceptional corrosion resistance and structural integrity. Its precise dimensions ensure seamless integration into critical applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.334" |
| Length | 14" |
| Width | 19" |
Specified by design engineers worldwide, this 0.334-inch thick 304 stainless steel stock sheet measures 14 inches in length and 19 inches in width. Composed of chromium (18%) and nickel (8%), it exhibits superior corrosion resistance, excellent weldability, and high tensile strength, making it ideal for fabricating components exposed to thermal cycling and aggressive environments. Its formability allows for complex designs in heat exchangers, ductwork, and appliance housings within HVAC and industrial process heating sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare mating surfaces for welding or fastening, ensuring they are clean and free of contaminants. 3. Execute fabrication and installation according to approved engineering drawings and relevant industry standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect gauge for load-bearing applications. | Consult structural load calculations and material strength charts to ensure the selected thickness is adequate for the intended application. |
| Inadequate surface preparation before welding. | Thoroughly degrease and remove any scale or oxide layers from the weld area to prevent porosity and ensure weld strength. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Components, HVAC Ducting and Housings, Industrial Oven Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||