This 304 stainless steel stock sheet offers superior corrosion resistance and durability. Its robust construction makes it ideal for high-traffic, demanding environments within plumbing and janitorial sectors.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.332" |
| Length | 39" |
| Width | 22" |
Manufactured under strict quality controls, this 304 stainless steel sheet exhibits excellent formability and weldability, conforming to ASTM A240 standards. The 0.332" (approx. 8.43mm) thickness provides substantial rigidity for structural components, while the 39" x 22" dimensions offer versatility for custom fabrication. Its inherent passivation layer ensures exceptional resistance to rust, staining, and chemical attack, making it the material of choice for sanitary applications, equipment fabrication, and protective barriers in environments prone to moisture and corrosive agents.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris before placement. 2. Accurately measure and mark cut lines using appropriate marking tools. 3. Utilize industrial-grade cutting tools (e.g., abrasive saws, plasma cutters) suitable for stainless steel to make precise cuts. 4. Deburr all cut edges to eliminate sharp points and ensure safety.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools, leading to contamination and potential rust. | Always use dedicated stainless steel cutting blades and tools, ensuring they are clean and free from carbon steel residue. |
| Improper edge finishing, leaving sharp burrs that pose a safety hazard. | Thoroughly deburr all cut edges using a file or grinding wheel designed for metal. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Fabrication of custom sinks and drains, Construction of janitorial service carts and equipment, Creation of protective wall panels and splash guards.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||