This high-grade 304 stainless steel stock sheet is engineered for critical hydraulic systems. Its robust construction and excellent corrosion resistance ensure reliability and longevity in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.311" |
| Length | 36" |
| Width | 15" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a substantial thickness of 0.311 inches, a length of 36 inches, and a width of 15 inches. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and its good mechanical strength, make this sheet ideal for fabrication of hydraulic components such as manifolds, reservoirs, and structural elements that require high integrity and resistance to fluid contamination. Its formability and weldability further enhance its suitability for complex hydraulic system designs.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from any contaminants before cutting or machining. 2. Precisely cut the sheet to the required dimensions using appropriate tooling for stainless steel. 3. Fabricate components according to design specifications, paying close attention to welding and finishing procedures for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper lubrication, leading to excessive heat and potential galling. | Utilize specialized stainless steel cutting tools and apply appropriate cutting fluids to manage heat and prevent material adhesion. |
| Inadequate cleaning post-fabrication, leaving behind abrasive particles or chemical residues that can compromise hydraulic fluid purity. | Thoroughly clean and passivate all fabricated components to remove any machining debris or embedded contaminants before assembly into the hydraulic system. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Construction, Corrosion-Resistant Hydraulic Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||