This 0.286" thick 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely sized at 17" x 18", it's ideal for demanding heating and cooling system fabrication.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.286" |
| Length | 17" |
| Width | 18" |
Manufactured under strict quality controls, this 304 stainless steel sheet boasts exceptional strength and formability, crucial for robust heating and cooling components. With a precise thickness of 0.286 inches, a length of 17 inches, and a width of 18 inches, it meets stringent industry standards for thermal management systems. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and crevice corrosion, ensure long-term performance in high-temperature environments and exposure to various refrigerants and coolants, making it a preferred material for heat exchangers, ductwork, and enclosures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the sheet based on design specifications. 2. Utilize appropriate cutting tools (e.g., shear, plasma cutter, waterjet) to achieve precise dimensions. 3. Deburr all cut edges to remove sharp protrusions and prepare for subsequent fabrication or assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inaccurate cutting leading to dimensional deviations. | Calibrate cutting equipment and double-check measurements before and during the cutting process. |
| Failure to address sharp edges after cutting, creating safety hazards. | Thoroughly deburr all cut edges using files, grinding wheels, or deburring tools. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, HVAC Ductwork Components, Industrial Oven Liners, Cryogenic Vessel Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||