This premium 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it an essential component for robust hydraulic system construction and repair.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.272" |
| Length | 46" |
| Width | 13" |
A high-performance industrial component, this 0.272-inch thick, 46-inch long, and 13-inch wide sheet is fabricated from AISI 304 stainless steel. This austenitic alloy provides excellent resistance to a broad spectrum of corrosive media, including many acids, alkalis, and industrial chemicals commonly encountered in hydraulic environments. Its inherent strength and formability allow for precise fabrication of manifolds, enclosures, and structural elements within hydraulic power units, mobile equipment, and specialized fluid handling systems, ensuring long-term operational reliability and safety under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting and shaping tools are suitable for 0.272" thick stainless steel. 2. Clean all surfaces to be joined to remove any oil, grease, or contaminants. 3. Follow appropriate welding or fastening procedures for 304 stainless steel to maintain material integrity and corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always use 304 or 316 stainless steel fasteners with this sheet to prevent corrosion. |
| Inadequate edge preparation prior to welding, resulting in weak or porous welds. | Properly bevel and clean all edges to be welded, ensuring full penetration and minimal contamination. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Hydraulic System Housings and Enclosures, Fluid Reservoirs and Filtration Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||