This 0.272" thick, 20" x 32" 304 stainless steel stock sheet offers exceptional corrosion resistance and mechanical strength, making it ideal for robust hydraulic systems and demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.272" |
| Length | 20" |
| Width | 32" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is manufactured to exacting standards for critical hydraulic system components. Measuring 0.272 inches in thickness, with a precise length of 20 inches and a width of 32 inches, its 304 stainless steel composition provides superior resistance to corrosion and pitting, essential for fluid handling under pressure. This material's excellent formability and weldability facilitate integration into complex hydraulic manifolds, reservoirs, and structural supports, ensuring long-term performance and reliability in harsh operating conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish against project requirements. 2. Clean the sheet thoroughly to remove any manufacturing residues or contaminants. 3. Prepare the sheet for cutting, bending, or fabrication according to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade steel for corrosive hydraulic environments. | Always specify 304 stainless steel or higher for applications exposed to moisture, chemicals, or saltwater. |
| Inadequate surface preparation before fabrication. | Thoroughly degrease and clean the sheet to prevent contamination during welding or forming, which can compromise corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Fabrication, Corrosion-Resistant Structural Components for Hydraulic Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||