This 304 stainless steel stock sheet offers robust performance for demanding industrial environments. Its excellent corrosion resistance and durability make it ideal for pressure and temperature control systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.267" |
| Length | 47" |
| Width | 41" |
A proven choice for industrial professionals, this 0.267-inch thick 304 stainless steel sheet measures 47 inches in length and 41 inches in width. Engineered from AISI 304 stainless steel, it provides superior resistance to a wide range of corrosive media, making it exceptionally well-suited for applications involving elevated pressures and temperatures. Its inherent strength and formability allow for reliable fabrication into critical components for heat exchangers, pressure vessels, and control manifolds where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces to ensure a particulate-free interface. 2. Carefully position the stock sheet according to design specifications, verifying alignment. 3. Secure the sheet using appropriate fastening methods, such as welding or bolting, adhering to recommended torque values or weld procedures.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor seal integrity. | Always degrease and mechanically clean all contact surfaces before installation. |
| Over-tightening fasteners, causing material deformation or stress risers. | Utilize a calibrated torque wrench and follow specified tightening sequences and values. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||