This 304 stainless steel stock sheet provides exceptional corrosion resistance and mechanical strength, making it ideal for fabrication in harsh hydraulic environments where fluid integrity is paramount.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.245" |
| Length | 31" |
| Width | 18" |
Engineered for reliability and performance, this 304 stainless steel stock sheet measures 0.245 inches thick, 31 inches in length, and 18 inches in width. Its 304 grade composition offers superior resistance to a wide range of corrosive media, including water, most organic chemicals, and many inorganic compounds, which is critical for hydraulic system components. The material's excellent formability and weldability allow for precise manufacturing of custom hydraulic manifolds, valve bodies, and structural supports. This sheet's robust nature ensures long-term service life and operational integrity under demanding pressure and chemical exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project requirements. 2. Prepare sheet edges for cutting or machining according to design specifications. 3. Fabricate components using appropriate machining and welding techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools for stainless steel, leading to work hardening and compromised edge quality. | Employ sharp, high-speed steel or carbide cutting tools specifically designed for stainless steel, utilizing appropriate lubricants and feed rates. |
| Inadequate cleaning prior to welding, causing contamination and porosity in the weld joint. | Thoroughly degrease and clean all welding surfaces with a stainless steel-approved solvent and wire brush before initiating the weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Valve Bodies, Corrosion-Resistant Hydraulic Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||