This 304 stainless steel stock sheet is engineered for superior performance in corrosive and high-pressure hydraulic environments. Its robust construction ensures longevity and reliability.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.224" |
| Length | 36" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.224" thick sheet offers a nominal length of 36" and a width of 38". Fabricated from 304 stainless steel, it provides exceptional corrosion resistance, particularly against a broad range of chemicals and atmospheric conditions, making it ideal for hydraulic manifold blocks, fluid reservoirs, and structural components in fluid power systems. The material's tensile strength and ductility ensure it can withstand significant operational stresses and forming processes without compromise.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of contaminants. 2. Accurately cut to the required dimensions using appropriate machining tools for stainless steel. 3. Deburr all edges to prevent stress risers and ensure safe handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel in corrosive hydraulic fluid applications. | Always specify 304 stainless steel or higher grades for environments prone to corrosion, especially with aggressive hydraulic fluids. |
| Inadequate edge preparation after cutting. | Thoroughly deburr all cut edges to prevent micro-cracking and improve the integrity of subsequent fabrication steps. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Fluid Reservoirs and Tanks, Custom Hydraulic Component Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||