This 304 stainless steel stock sheet is engineered for demanding pressure and temperature control environments. Its robust construction ensures reliability and longevity in critical industrial applications.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.218" |
| Length | 20" |
| Width | 16" |
A proven choice for industrial professionals, this 0.218" thick, 20" x 16" sheet of 304 stainless steel offers superior corrosion resistance and durability. The austenitic chromium-nickel composition provides excellent strength and formability, making it ideal for fabricating components that must withstand moderate to high pressures and a wide range of temperatures. Its non-magnetic properties and ease of cleaning further enhance its suitability for critical process equipment, heat exchangers, and piping systems where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is properly cleaned and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate fabrication tools. 3. Install the fabricated component according to the system's specific engineering drawings and safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong cutting tool, leading to burrs or deformation. | Utilize carbide-tipped blades or waterjet cutting for clean, precise edges on stainless steel. |
| Inadequate surface preparation before welding or joining. | Thoroughly degrease and remove any mill scale or oxide layers from the joining surfaces before proceeding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||