This 304 stainless steel stock sheet offers exceptional corrosion and heat resistance, making it a critical component for demanding pressure and temperature control systems. Engineered for reliability and longevity.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.215" |
| Length | 43" |
| Width | 39" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet (0.215" thickness, 43" length, 39" width) provides superior performance in environments subject to high pressures and fluctuating temperatures. Its 304 grade composition offers excellent resistance to oxidation and many corrosive media, ensuring structural integrity and longevity. This material is commonly specified for heat exchangers, pressure vessels, and critical components within HVAC and industrial process piping systems where material stability under thermal stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Mechanically fasten or weld the sheet according to design specifications, maintaining structural integrity and sealing requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause heat distortion or work hardening. | Employ sharp, dedicated stainless steel cutting tools (e.g., plasma cutter, waterjet, or abrasive saw) with adequate coolant to minimize heat input and maintain material properties. |
| Inadequate surface preparation before welding or fastening, leading to potential corrosion points. | Thoroughly clean the mating surfaces with a degreaser and wire brush, ensuring all mill scale, oils, and debris are removed to promote proper weld fusion and prevent galvanic corrosion. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Industrial oven liners, High-temperature ducting, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||