This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Precisely manufactured to 0.181" thickness, 26" length, and 37" width, it's an ideal component for demanding pressure and temperature control systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.181" |
| Length | 26" |
| Width | 37" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a nominal thickness of 0.181 inches, ensuring robust structural integrity. Its dimensions of 26 inches in length by 37 inches in width provide ample material for fabrication. Composed of austenitic chromium-nickel, 304 stainless steel offers excellent resistance to oxidation and corrosion, making it suitable for a wide range of environmental conditions. Its non-magnetic properties and good formability further enhance its utility in critical pressure vessels, heat exchangers, and other temperature-sensitive industrial assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material integrity against project specifications. 2. Prepare mating surfaces for welding or joining according to industry best practices. 3. Carefully position and secure the sheet for fabrication, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a thinner gauge than required for the expected pressure or temperature load. | Always consult pressure vessel codes and engineering calculations to determine the minimum required material thickness based on design parameters. |
| Inadequate post-weld cleaning, leading to potential crevice corrosion. | Thoroughly clean all weld areas and surrounding material using appropriate methods like passivation and pickling to remove contaminants and restore the passive layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||