This 304 stainless steel stock sheet, precision-cut to 0.172" thickness, 34" length, and 13" width, is engineered for demanding heating and cooling environments, offering superior corrosion resistance and thermal stability.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.172" |
| Length | 34" |
| Width | 13" |
Built to exacting engineering tolerances, this 304 stainless steel sheet boasts a substantial 0.172" (4.37mm) thickness, providing exceptional structural integrity and heat retention. Its dimensions of 34" (863.6mm) in length and 13" (330.2mm) in width are optimized for fabrication in various heating and cooling systems. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of media, high tensile strength, and formability, make it an ideal material for heat exchangers, ductwork, furnace components, and appliance casings where durability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Precisely cut or form the sheet to the required dimensions using appropriate tooling. 3. Securely fasten the sheet using welding, riveting, or mechanical fasteners suitable for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools which can cause galvanic corrosion. | Utilize dedicated stainless steel tooling or ensure tools are thoroughly cleaned before contact. |
| Inadequate edge preparation leading to weak welds. | Properly bevel and clean all edges to be welded to ensure full penetration and strength. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Oven Linings, HVAC Ductwork Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||