Engineered for demanding environments, this 0.140" thick 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Its precise dimensions make it ideal for fabricating components used in critical pressure and temperature control systems.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.140" |
| Length | 30" |
| Width | 29" |
Specified by design engineers worldwide, this 0.140" thick 304 stainless steel stock sheet (30" length x 29" width) is manufactured to exacting tolerances. Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to oxidation and corrosion in various aggressive media, maintaining structural integrity under fluctuating pressures and temperatures. Its formability and weldability facilitate integration into complex assemblies for heat exchangers, pressure vessels, and control manifolds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project specifications. 2. Prepare surfaces for fabrication, ensuring cleanliness and freedom from contaminants. 3. Fabricate components according to approved engineering drawings, employing appropriate welding and forming techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade stainless steel for corrosive applications. | Always confirm 304 stainless steel or a higher grade is specified for applications involving corrosive chemicals or extreme temperatures. |
| Inadequate surface preparation prior to welding or forming. | Thoroughly clean the sheet surface to remove oils, greases, and any foreign matter that could compromise weld quality or material integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Control valve bodies, Industrial manifold construction, High-temperature ducting.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||