This 0.135" thick 304 stainless steel stock sheet, measuring 37" x 32", is engineered for demanding heating and cooling applications. Its superior corrosion resistance and durability make it ideal for long-term performance in harsh environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.135" |
| Length | 37" |
| Width | 32" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet offers exceptional material integrity. With a precise thickness of 0.135 inches, a length of 37 inches, and a width of 32 inches, it meets rigorous industry specifications for HVAC components. Composed of a chromium-nickel alloy, it exhibits excellent resistance to oxidation and corrosion, crucial for heat exchangers, ductwork, and other climate control systems exposed to varying temperatures and moisture. Its formability and weldability further enhance its suitability for custom fabrication within heating and cooling infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project requirements. 2. Ensure cutting and fabrication equipment is calibrated for 0.135" thick 304 stainless steel. 3. Install fabricated components following approved HVAC system design specifications and local building codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect gauge for the application. | Always confirm the required thickness and load-bearing capacity for the specific heating or cooling component before selecting a sheet. |
| Inadequate surface preparation before welding or joining. | Thoroughly clean the stainless steel surfaces to remove any contaminants, oils, or oxides to ensure strong and corrosion-resistant welds. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, HVAC Ductwork Systems, Furnace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||