Engineered for robust performance in critical heating and cooling systems. This 304 stainless steel sheet offers superior corrosion resistance and thermal stability for demanding industrial environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.127" |
| Length | 37" |
| Width | 43" |
Purpose-built for heavy-duty applications, this 0.127" thick sheet of 304 stainless steel provides exceptional strength and longevity. Measuring 37" in length and 43" in width, it is ideal for fabricating heat exchangers, ductwork, combustion chambers, and other components exposed to elevated temperatures and corrosive media. The inherent properties of 304 stainless steel, including its excellent weldability and resistance to oxidation and pitting, ensure reliable operation and extended service life in challenging thermal management scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Accurately measure and cut the 304 stainless steel sheet to the required dimensions. 3. Securely fasten the sheet using appropriate welding or mechanical joining methods, ensuring airtight seals for thermal efficiency.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments. | Always specify 304 stainless steel for its superior corrosion resistance in heating and cooling applications. |
| Insufficient material thickness for load-bearing components. | Verify that the 0.127" thickness is adequate for the specific structural and thermal loads of the application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, Industrial Ductwork Systems, Combustion Chamber Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||