This 304 stainless steel stock sheet is engineered for robust hydraulic system components. Its superior corrosion resistance and mechanical integrity ensure reliable performance in demanding environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.126" |
| Length | 39" |
| Width | 40" |
Purpose-built for heavy-duty applications, this 0.126" thick 304 stainless steel sheet offers exceptional tensile strength and a high yield point, crucial for high-pressure hydraulic systems. Its inherent corrosion resistance to a wide range of fluids, including hydraulic oils and potential contaminants, makes it ideal for mobile equipment, industrial machinery, and marine hydraulics. The sheet measures 39" in length and 40" in width, providing ample material for fabrication of manifolds, reservoir components, structural supports, and custom fittings where material purity and longevity are paramount. Compliance with relevant ASME and ASTM standards for stainless steel fabrication is implied for critical hydraulic applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and surface finish against project requirements. 2. Precisely cut sheet to size using appropriate metalworking tools (e.g., laser cutter, waterjet, shear). 3. Deburr all cut edges to remove sharp fragments and ensure safety during subsequent fabrication and handling.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation leading to stress concentrations. | Thoroughly deburr and radiuse all cut edges to prevent crack initiation and propagation under dynamic pressure. |
| Contamination of the stainless steel surface during fabrication. | Utilize dedicated tools and a clean working environment to prevent galvanic corrosion or surface pitting. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Blocks, Hydraulic Reservoir Fabrication, High-Pressure Fluid Power Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||