This 304 stainless steel stock sheet is engineered for robust hydraulic applications. Its superior corrosion resistance and mechanical integrity ensure reliable performance in challenging industrial settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.115" |
| Length | 37" |
| Width | 39" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Measuring 0.115 inches thick, 37 inches in length, and 39 inches in width, it is manufactured from Type 304 stainless steel, renowned for its excellent workability and resistance to a wide range of corrosive media common in hydraulic systems. This material is ideal for fabricating custom hydraulic manifolds, fluid reservoirs, and protective enclosures where integrity and longevity are paramount. Its precise dimensions facilitate seamless integration into complex hydraulic assemblies and ensure consistent performance under pressure and varying environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any surface contaminants. 2. Cut to required dimensions using appropriate metalworking tools for stainless steel. 3. Fabricate or weld components according to hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for hydraulic components in corrosive environments. | Always specify 304 stainless steel or higher grades for hydraulic components exposed to moisture, chemicals, or saltwater to prevent premature corrosion and system failure. |
| Improper welding procedures for stainless steel, leading to sensitization. | Employ proper inert gas welding techniques (e.g., TIG) and maintain interpass temperatures to prevent chromium carbide precipitation and ensure weld integrity and corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Reservoir Construction, Corrosion-Resistant Hydraulic Component Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||