Engineered for robust performance in thermal management systems, this 304 stainless steel sheet offers superior corrosion resistance and formability. Ideal for fabricating durable HVAC components.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.114" |
| Length | 38" |
| Width | 13" |
A high-performance industrial component, this 0.114-inch thick sheet of 304 stainless steel is precisely manufactured to dimensions of 38 inches in length and 13 inches in width. The austenitic 304 alloy provides exceptional resistance to oxidation and corrosion, crucial for environments exposed to moisture, chemicals, and temperature fluctuations inherent in heating and cooling systems. Its excellent weldability and formability allow for intricate fabrication of ductwork, heat exchangers, and other critical thermal transfer components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., shear, plasma cutter) to achieve precise dimensions. 3. Deburr all cut edges to ensure a smooth and safe finish before further fabrication or assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Incorrectly measuring cut lines, leading to material waste or undersized components. | Double-check all measurements using calibrated measuring tools before cutting. |
| Failing to deburr edges, creating sharp hazards and potential for damage to other components. | Always thoroughly deburr all cut edges with a file or deburring tool. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: HVAC Ductwork Fabrication, Heat Exchanger Components, Combustion Chambers and Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||