Engineered for robust performance, this 304 stainless steel stock sheet provides exceptional durability and corrosion resistance, ideal for critical heating and cooling system components.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.091" |
| Length | 18" |
| Width | 46" |
Designed for demanding industrial environments, this 0.091" thick 304 stainless steel stock sheet measures 18" in length and 46" in width. Composed of 18% chromium and 8% nickel, it offers superior resistance to oxidation and corrosion, even at elevated temperatures. Its formability and weldability facilitate integration into complex ductwork, heat exchangers, and exhaust systems. This material's inherent strength and non-magnetic properties make it suitable for a wide range of HVAC, chemical processing, and food service equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and condition prior to cutting. 2. Utilize appropriate cutting tools designed for stainless steel to achieve precise edges. 3. Ensure all joining surfaces are clean and free of contaminants before welding or fastening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools that can cause contamination and galvanic corrosion. | Employ dedicated stainless steel cutting and handling tools to prevent cross-contamination. |
| Inadequate edge preparation leading to weak or brittle welds. | Properly bevel and clean edges to ensure optimal weld penetration and integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat exchanger fabrication, HVAC ductwork and plenums, Industrial exhaust systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||