This 304 stainless steel stock sheet is engineered for demanding pressure and temperature control systems. Its robust construction ensures reliability and longevity in critical industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.080" |
| Length | 18" |
| Width | 13" |
A proven choice for industrial professionals, this 0.080" thick, 18" x 13" sheet is manufactured from premium 304 stainless steel. This austenitic alloy offers exceptional corrosion resistance, particularly against oxidizing acids, and exhibits excellent formability and weldability. Its non-magnetic properties and superior strength at elevated temperatures make it ideal for components within pressure vessels, heat exchangers, and various temperature regulation manifolds. The precise dimensions and material integrity meet the stringent requirements of high-performance fluid and gas handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of contaminants. 2. Precisely cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Secure the sheet using approved welding or fastening methods, adhering to pressure vessel codes if applicable.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to work hardening or contamination. | Employ sharp, high-quality cutting tools specifically designed for stainless steel, such as abrasive cut-off wheels or plasma cutters. Ensure proper lubrication and cooling. |
| Inadequate surface preparation before welding, resulting in weak or corroded welds. | Thoroughly clean the weld joint area to remove all oils, grease, and oxides. Use stainless steel brushes and solvents. Consider pickling and passivation after welding for optimal corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Temperature control manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||