This 304 stainless steel sheet offers superior corrosion resistance and durability, making it an ideal material for critical pressure and temperature control applications in harsh industrial settings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.073" |
| Length | 24" |
| Width | 46" |
A proven choice for industrial professionals, this 0.073" thick, 24" x 46" sheet of 304 stainless steel provides exceptional performance in demanding environments. Grade 304 offers a balanced combination of formability, weldability, and excellent corrosion resistance, particularly against a wide range of atmospheric and chemical agents. Its non-magnetic properties and ability to withstand high temperatures make it a superior material for components within pressure vessels, heat exchangers, and other critical thermal management systems where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free of contaminants. 2. Carefully position the sheet according to design specifications, aligning all connection points. 3. Secure the sheet using appropriate fastening methods (e.g., welding, bolting) as dictated by the application's pressure and temperature requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of stainless steel for corrosive environments. | Always verify the specific corrosive agents present and select a stainless steel grade (like 304 for general use or higher grades for extreme conditions) that offers proven resistance. |
| Improper welding techniques leading to sensitization and reduced corrosion resistance. | Employ proper welding procedures for 304 stainless steel, such as using low-carbon filler metals or ensuring adequate post-weld heat treatment if required by the application. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Thermal management systems, Corrosion-resistant enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||