This 304 stainless steel stock sheet is engineered for superior performance in hydraulic systems. Its robust construction offers exceptional corrosion resistance and mechanical strength, ensuring reliability in challenging environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.069" |
| Length | 19" |
| Width | 19" |
Precision-manufactured to tight tolerances, this 0.069-inch thick 304 stainless steel sheet measures 19 inches by 19 inches. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and its non-magnetic nature, make it an ideal material for components within hydraulic circuits where fluid compatibility and long-term integrity are paramount. This sheet is suitable for fabrication of hydraulic manifolds, reservoirs, and custom fittings, providing a durable and reliable foundation for your fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any contaminants. 2. Fabricate components according to design specifications, ensuring clean cuts and proper deburring. 3. Integrate fabricated parts into the hydraulic system, following established assembly protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade or incompatible materials for hydraulic components. | Always specify and use 304 stainless steel or higher for hydraulic applications requiring corrosion resistance and strength. |
| Improper handling leading to surface damage or contamination. | Handle sheets with care, using appropriate lifting equipment and protecting surfaces from scratches and debris. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic Manifold Fabrication, Custom Hydraulic Reservoir Construction, Hydraulic Fitting and Connector Manufacturing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||