This 304 stainless steel stock sheet provides exceptional corrosion resistance and mechanical strength, making it a reliable choice for demanding hydraulic system components and custom fabrication.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.057" |
| Length | 37" |
| Width | 35" |
Built to exacting engineering tolerances, this 0.057" thick sheet of 304 stainless steel offers superior tensile strength and formability for critical hydraulic applications. The inherent passivation layer of 304 SS ensures excellent resistance to a wide range of corrosive fluids and environments commonly found in hydraulic systems. Its precise dimensions of 37" length and 35" width allow for efficient material utilization in the fabrication of manifolds, housings, and other vital hydraulic infrastructure, ensuring consistent performance and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material certification against project requirements. 2. Prepare cut lines precisely, accounting for material thickness and intended component function. 3. Fabricate and assemble components according to hydraulic system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using lower-grade stainless steel susceptible to corrosion in hydraulic fluid. | Always specify and verify 304 stainless steel or higher for hydraulic applications to ensure long-term integrity and performance. |
| Inaccurate cutting leading to poor component fit and potential leaks. | Employ precision cutting methods and double-check all measurements before fabrication to ensure tight tolerances. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Hydraulic manifold fabrication, Custom hydraulic component housing, Corrosion-resistant hydraulic fluid reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||