This 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Precisely manufactured to 0.038" thickness, it's ideal for fabricating components in demanding pressure and temperature control environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.038" |
| Length | 24" |
| Width | 25" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a thickness of 0.038 inches, a length of 24 inches, and a width of 25 inches. Its 304 grade composition provides superior resistance to oxidation and a wide range of corrosive media, ensuring longevity in critical applications. The material's inherent strength and formability make it suitable for custom fabrication of pressure vessels, heat exchangers, control panels, and intricate plumbing systems that operate under varying thermal and pressure loads. Its polished surface finish minimizes contamination and facilitates easy cleaning. Compliance with relevant industry standards for stainless steel sheet is assured.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate by ensuring it is clean, dry, and free from contaminants. 2. Accurately cut the 304 stainless steel sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component using compatible fasteners or welding techniques, ensuring a leak-proof seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to burrs and edge damage. | Utilize high-quality, dedicated stainless steel cutting blades (e.g., carbide-tipped) and ensure proper feed rates to maintain edge integrity. |
| Inadequate cleaning before fabrication or welding, resulting in surface contamination and compromised corrosion resistance. | Thoroughly degrease and clean the sheet surface with approved solvents or alkaline cleaners before any fabrication or welding processes. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pressure vessel fabrication, Heat exchanger components, Control panel construction, High-temperature ducting, Corrosive fluid handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||