This 304 stainless steel stock sheet is engineered for superior performance in high-temperature and corrosive HVAC applications. Its robust construction ensures longevity and reliability.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.035" |
| Length | 32" |
| Width | 20" |
Designed for demanding industrial environments, this 304 stainless steel sheet offers exceptional corrosion resistance and durability. With a precise thickness of 0.035 inches, a length of 32 inches, and a width of 20 inches, it meets stringent ASTM A240 specifications for stainless steel plate, sheet, and strip for pressure vessels and for general-purpose applications. The inherent properties of 304 stainless steel, including its excellent weldability and formability, make it ideal for fabricating critical components within heating and cooling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the sheet, aligning it with pre-drilled holes or designated mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard sheet metal screws on critical HVAC components. | Utilize self-tapping screws specifically rated for stainless steel or use appropriate welding techniques for permanent, robust connections. |
| Not considering thermal expansion during installation. | Incorporate expansion joints or slotted holes where significant temperature fluctuations are expected to prevent stress and deformation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heat Exchanger Fabrication, HVAC Ductwork Lining, Condensate Pans & Drainage Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||