This 304 stainless steel stock sheet provides superior corrosion resistance and durability for demanding plumbing and janitorial applications. Its robust construction ensures longevity in high-traffic, corrosive environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.027" |
| Length | 13" |
| Width | 13" |
Designed for demanding industrial environments, this 0.027" thick, 13" x 13" sheet is fabricated from high-grade 304 stainless steel. This austenitic stainless steel alloy offers excellent resistance to a wide range of corrosive media and atmospheric conditions, making it suitable for applications requiring hygiene and chemical inertness. Its non-magnetic properties and formability allow for easy fabrication into custom components, splash guards, liners, or protective panels in kitchens, laboratories, and healthcare facilities. The polished surface finish minimizes adhesion and facilitates thorough cleaning, crucial for sanitary environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly, ensuring it is free of debris and grease. 2. Position the stainless steel sheet precisely at the desired location, aligning it with any pre-drilled holes or guide marks. 3. Secure the sheet using appropriate fasteners (e.g., screws, rivets) suitable for the substrate and the intended load-bearing capacity. Ensure fasteners are also corrosion-resistant.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel fasteners which will corrode and stain the stainless steel. | Always use 304 or 316 stainless steel fasteners to maintain the integrity of the installation. |
| Applying abrasive cleaners or tools that can scratch the surface and compromise its corrosion resistance. | Use only non-abrasive cleaning agents and soft cloths or sponges for cleaning and maintenance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Splash guards in commercial kitchens, Lining for drains and sumps in janitorial areas, Protective panels in laboratory environments, Custom fabrication for sanitation equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||