This robust carbon steel stock sheet, measuring 28" x 26" x 0.249", offers exceptional strength and durability. Engineered for demanding plumbing and janitorial environments, it provides a reliable foundation for custom fabrications and structural support.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.249" |
| Length | 28" |
| Width | 26" |
Precision-manufactured to tight tolerances, this 0.249" thick carbon steel sheet (ASTM A36 or equivalent) provides superior mechanical properties for critical applications. Its substantial 28" x 26" dimensions offer ample material for fabrication. The inherent strength and weldability of carbon steel make it ideal for constructing custom pipe hangers, structural supports for plumbing fixtures, bracing for janitorial equipment, and protective enclosures where impact resistance and load-bearing capacity are paramount. Surface may require preparation for specific finishes or coatings depending on the operating environment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and condition against project requirements. 2. Cut sheet to the desired template using appropriate metal cutting tools (e.g., abrasive saw, plasma cutter). 3. Prepare edges for welding or fastening according to fabrication standards and design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting equipment, leading to burrs or material distortion. | Employ industrial-grade cutting tools designed for carbon steel thickness, ensuring clean cuts and minimal heat affected zones. |
| Neglecting surface preparation before welding or coating. | Thoroughly degrease and remove any mill scale or rust from the cut edges and intended weld areas to ensure optimal weld penetration and adhesion. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Custom pipe support fabrication, Structural bracing for janitorial stations, Protective shielding for plumbing infrastructure.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||