This premium brass stock sheet, precisely fabricated to 0.247" thickness, 26" length, and 15" width, offers superior performance in demanding pressure and temperature control systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.247" |
| Length | 26" |
| Width | 15" |
Built to exacting engineering tolerances, this brass stock sheet (0.247" x 26" x 15") utilizes the inherent strength and corrosion resistance of brass (e.g., C26000 cartridge brass) to ensure long-term reliability in high-stress environments. Its dimensional stability makes it ideal for fabrication into critical components such as valve bodies, regulator diaphragms, and heat exchanger plates, where consistent material properties and leak-proof seals are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, free of debris, and properly prepared for sealing. 2. Carefully align the brass stock sheet with the intended mounting points or components. 3. Securely fasten the sheet using appropriate fasteners and sealing methods as dictated by the system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to leaks. | Thoroughly clean and degrease all mating surfaces before installation to ensure a perfect seal. |
| Over-tightening fasteners, causing deformation of the brass. | Use a torque wrench and adhere to specified torque values for fasteners to prevent material stress and potential failure. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure regulator components, Temperature control valve bodies, Heat exchanger fabrication, Fluid control manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||