This robust brass stock sheet, engineered to exacting standards, provides exceptional durability for critical pulling and lifting operations. Its substantial thickness and inherent material properties ensure reliable performance under heavy loads.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.607" |
| Length | 24" |
| Width | 31" |
Built to exacting engineering tolerances, this 0.607-inch thick brass stock sheet offers a generous 24-inch by 31-inch surface area. Composed of a high-tensile brass alloy (e.g., UNS C36000 free-machining brass), it exhibits superior tensile strength, excellent corrosion resistance, and non-sparking properties, making it ideal for environments where ignitions are a concern. Its precise dimensions and material composition ensure consistent load-bearing capacity and predictable deformation under stress, crucial for safe and efficient operation in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, level, and capable of supporting the intended load. 2. Position the brass stock sheet according to the design specifications, aligning all mounting holes. 3. Secure the sheet using appropriate high-strength fasteners (e.g., stainless steel bolts and washers) torqued to manufacturer recommendations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, potentially deforming the brass sheet. | Use a torque wrench and adhere to specified torque values for fasteners. |
| Using fasteners made of dissimilar metals that can cause galvanic corrosion. | Employ stainless steel or brass fasteners of appropriate grade to prevent corrosion. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty winch and hoist components, Customized lifting plate fabrication, Reinforcement plates for extreme environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||