Engineered for extreme durability, this 1" thick polycarbonate stock sheet offers superior impact resistance for heavy-duty pulling and lifting applications. Its robust material properties ensure reliable performance under significant stress.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 1.000" |
| Length | 42" |
| Width | 47" |
Built to exacting engineering tolerances, this 1.000" thick polycarbonate stock sheet measures 42" in length and 47" in width. The material's inherent high tensile strength, excellent impact resistance (Izod notch: 14 ft-lb/in), and wide service temperature range (-40°F to 250°F) make it an ideal substrate for custom fabricated components used in demanding pulling and lifting scenarios. Its clarity and rigidity allow for precise alignment and load bearing in critical industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, flat, and free of debris. 2. Precisely align the polycarbonate sheet according to the design specifications. 3. Secure the sheet using appropriate fasteners and torque settings, avoiding over-tightening to prevent stress concentration.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without considering shear forces. | Utilize fasteners specifically rated for shear loads encountered in pulling and lifting applications and ensure proper spacing. |
| Overtightening fasteners, leading to stress cracks in the polycarbonate. | Employ a torque wrench to secure fasteners to the manufacturer's recommended torque specifications for polycarbonate, preventing premature failure. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom pulling rig components, Heavy-duty lifting fixture fabrication, Impact-resistant guards for machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||