This high-performance Nylon stock sheet offers exceptional wear resistance, low friction, and excellent mechanical strength. Its robust composition makes it a superior choice for demanding industrial applications requiring durability and precision.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 1.000" |
| Length | 46" |
| Width | 25" |
A proven choice for industrial professionals, this 1.000-inch thick Nylon stock sheet measures 46 inches in length and 25 inches in width, providing ample material for custom fabrication. Nylon's inherent properties include high tensile strength, excellent toughness, and good chemical resistance to oils and solvents. This makes it ideal for components subjected to moderate pressure and temperature fluctuations, such as wear pads, bearing surfaces, and structural elements within pressure and temperature control systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Carefully measure and mark the desired dimensions on the nylon sheet. 3. Use appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for precise cuts, maintaining coolant if necessary to prevent overheating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades which can chip or melt the nylon. | Employ specialized blades designed for plastics or hardwoods, ensuring a sharp edge and appropriate feed rate. |
| Overheating the material during cutting, leading to deformation or brittleness. | Utilize a coolant or lubricant during the cutting process and maintain a consistent, moderate cutting speed. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Strips and Guide Rails, Gears and Sprockets, Seals and Gaskets for moderate pressure/temperature.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||