This premium carbon steel stock sheet is engineered for extreme hydraulic environments. Its robust 0.998-inch thickness and substantial dimensions ensure unparalleled structural integrity for critical components.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.998" |
| Length | 42" |
| Width | 24" |
Purpose-built for heavy-duty applications, this carbon steel stock sheet offers exceptional tensile strength and rigidity, essential for withstanding high pressures and operational stresses within hydraulic systems. Measuring 0.998 inches thick, 42 inches in length, and 24 inches in width, it provides ample material for fabricating robust cylinders, manifold blocks, and structural supports. The inherent properties of carbon steel, including its machinability and weldability, facilitate precise component manufacturing and integration. This material selection is optimized for applications demanding reliability and longevity under extreme loads and conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and quality against project specifications. 2. Prepare edges for welding or machining according to design requirements. 3. Securely fasten and integrate into the hydraulic assembly, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding procedures for heavy gauge carbon steel, leading to compromised joint integrity. | Employ preheating and post-weld heat treatment (PWHT) as per established welding codes for thick carbon steel sections to prevent cracking and ensure optimal weld strength. |
| Inadequate surface preparation before component fabrication, resulting in premature corrosion or coating failure. | Thoroughly clean all surfaces to remove mill scale, oil, and contaminants. Utilize abrasive blasting or chemical cleaning methods to achieve a suitable profile for subsequent treatments or coatings. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Cylinder Construction, High-Pressure Manifold Fabrication, Heavy Equipment Structural Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||