This high-grade brass stock sheet, precisely manufactured to 0.998" thickness, is engineered for demanding pressure and temperature control systems. Its robust composition ensures reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.998" |
| Length | 40" |
| Width | 21" |
Built to exacting engineering tolerances, this brass stock sheet measures 0.998 inches in thickness, 40 inches in length, and 21 inches in width. Composed of a high-copper alloy (typically C36000 or similar), it exhibits excellent machinability, good corrosion resistance, and superior thermal conductivity, making it ideal for components within pressure vessels, heat exchangers, and valve bodies subjected to moderate pressures and temperatures. Its dimensional stability ensures consistent fit and function in complex assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surface is clean and free of debris before placement. 2. Secure sheet using appropriate fasteners, distributing load evenly to prevent deformation. 3. Verify dimensional accuracy and integrity after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that lead to localized stress concentrations. | Employ fasteners that match or exceed the load-bearing requirements of the application and distribute them appropriately across the sheet's surface. |
| Exposing the brass to aggressive chemicals without proper consideration of its corrosion resistance limits. | Consult material compatibility charts and ensure the brass is suitable for the specific chemical environment or apply protective coatings if necessary. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Pressure vessel fabrication, Heat exchanger components, Valve body construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||