This premium carbon steel stock sheet, precisely manufactured to 0.997" thickness, is ideal for fabricating robust hydraulic components. Its substantial dimensions (43"x39") offer ample material for complex designs, ensuring structural integrity under extreme pressure.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.997" |
| Length | 43" |
| Width | 39" |
Engineered for reliability and performance, this carbon steel stock sheet boasts a nominal thickness of 0.997 inches, a length of 43 inches, and a width of 39 inches. Manufactured from high-grade carbon steel, it offers excellent tensile strength and yield strength, crucial for withstanding high hydraulic pressures and cyclic loading. Its robust composition ensures resistance to deformation and fatigue, making it suitable for critical hydraulic manifold blocks, heavy-duty cylinder construction, and specialized pump housings where material integrity is paramount. Proper surface finish is maintained to facilitate machining and sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project specifications. 2. Precisely cut the stock sheet to the required component dimensions using appropriate industrial cutting tools. 3. Deburr all cut edges thoroughly to prevent stress risers and ensure a clean surface for subsequent operations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel instead of certified hydraulic grade carbon steel. | Always specify and procure hydraulic-grade carbon steel stock sheets to guarantee the required pressure handling capabilities and material properties. |
| Inadequate edge preparation after cutting. | Thoroughly deburr and chamfer all cut edges to eliminate sharp corners and prevent premature material failure or seal damage. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic Manifold Blocks, Heavy-Duty Hydraulic Cylinder Fabrication, High-Pressure Pump Casings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||