This high-grade carbon steel stock sheet is engineered for robust performance in critical hydraulic systems. Its substantial thickness and precise dimensions ensure superior structural integrity and longevity under extreme pressure.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.996" |
| Length | 32" |
| Width | 21" |
Manufactured under strict quality controls, this 0.996-inch thick carbon steel sheet boasts a minimum tensile strength of 400 MPa and a yield strength of 250 MPa, ensuring exceptional load-bearing capacity. Measuring 32 inches in length and 21 inches in width, it is ideal for fabricating robust hydraulic components such as pump housings, valve bodies, and accumulator shells. The material's inherent toughness and resistance to wear make it a reliable choice for high-pressure fluid power applications. Surface finish is typically a cold-rolled mill finish, suitable for subsequent machining or welding.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the steel sheet is clean and free of contaminants before fabrication. 2. Precisely cut the sheet to the required dimensions using appropriate industrial cutting tools. 3. Fabricate components according to design specifications, employing welding or machining techniques suitable for carbon steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for high-pressure hydraulic applications. | Always verify the required material thickness based on pressure ratings and structural load calculations for hydraulic components. |
| Inadequate surface preparation before welding or coating. | Thoroughly clean the carbon steel surface, removing all mill scale, rust, and oil to ensure optimal weld penetration and adhesion of protective coatings. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Hydraulic cylinder construction, Pump and valve manifold fabrication, High-pressure accumulator shells.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||