This robust carbon steel stock sheet is engineered for heavy-duty pulling and lifting operations. Its substantial thickness and durable material ensure exceptional strength and reliability in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.990" |
| Length | 40" |
| Width | 38" |
Built to exacting engineering tolerances, this 0.990-inch thick carbon steel stock sheet measures 40 inches in length and 38 inches in width. Composed of high-grade carbon steel, it offers superior tensile strength and yield strength, making it ideal for applications requiring significant load-bearing capacity. The material's inherent toughness ensures resistance to deformation under extreme stress, crucial for safe and efficient pulling and lifting equipment fabrication and repair.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the stock sheet is clean and free of contaminants. 2. Accurately mark and cut the sheet to the required dimensions using appropriate industrial cutting equipment. 3. Fabricate or integrate the cut sheet into the pulling or lifting apparatus according to design specifications and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower-grade steel for critical load-bearing components. | Always specify and verify the use of high-strength carbon steel with documented mechanical properties for all pulling and lifting applications. |
| Inadequate edge preparation leading to stress concentrations. | Properly deburr and chamfer all cut edges to eliminate sharp corners and potential stress risers, ensuring structural integrity. |
A: This Carbon Steel Stock Sheet is manufactured from Carbon Steel.
A: Fabrication of heavy-duty lifting slings and chains, Construction of robust winch drums and cable guides, Repair and reinforcement of industrial towing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||