This robust 0.983" thick polycarbonate sheet, measuring 15"x27", is engineered for high-pressure hydraulic systems. It offers exceptional impact resistance and clarity, ensuring reliable performance in demanding environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.983" |
| Length | 15" |
| Width | 27" |
Manufactured under strict quality controls, this 0.983" polycarbonate stock sheet is precision-cut to dimensions of 15"x27". Its superior impact strength, exceeding that of acrylic and glass, makes it ideal for guarding hydraulic components, sight glasses, and protective enclosures where resistance to high pressure and potential impacts is critical. The material's excellent optical clarity allows for easy visual monitoring of fluid levels and system status, while its inherent toughness prevents shattering under stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning mounting holes if pre-drilled. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking or crazing. | Use washers to distribute load and tighten fasteners to the manufacturer's recommended torque specifications. Avoid overtightening. |
| Using abrasive cleaning agents or tools that can scratch the polycarbonate surface. | Clean with a mild soap and water solution, using a soft cloth or sponge. Avoid harsh chemicals or abrasive pads. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system sight glasses, Protective guards for hydraulic equipment, Enclosures for hydraulic control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||