This robust Nylon stock sheet provides exceptional performance in critical pressure and temperature control systems. Its superior material properties ensure reliable operation under demanding environmental conditions.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.977" |
| Length | 14" |
| Width | 24" |
Specified by design engineers worldwide, this 0.977" thick Nylon stock sheet, measuring 14" x 24", is engineered for superior performance in pressure and temperature control applications. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and a wide operating temperature range, make it ideal for seals, gaskets, and structural components in hydraulic, pneumatic, and thermal management systems. Its dimensional stability ensures consistent performance and longevity in high-stress environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the mating surfaces to ensure a debris-free interface. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Carefully install the cut component, ensuring proper seating and sealing within the assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to rough edges and improper fit. | Employ sharp, specialized cutting tools designed for plastics to achieve clean, precise cuts. |
| Failure to ensure surface cleanliness before installation, compromising seal integrity. | Always degrease and clean mating surfaces thoroughly to eliminate contaminants. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic and pneumatic seals, Gaskets for high-temperature applications, Bushings and wear pads in control mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||